Probe Master 4232

Product Highlights

• Switching Power Supply Design
• Motor Drive Design
• Electronic Ballast Design
• CRT Display Design
• Up to +/-1400V (DC +Peak AC) Differential and Common Mode
• Safety Certified
• Economical cost
• Bandwidth DC to 25 MHz (-3dB)
• Attenuation Ratio 1:10/100
• Accuracy +/- 2%
• Rise Time 14ns
• Input Impedance 4 Mohm//5.5pF each side to ground
• Input Voltage -Category -Differential Range -Common Mode Range -Absolute Max. Voltage(Differential or Common Mode) Cat III 70 Vrms and +/- 70V(DC + Peak AC)@ 1/10 700 Vrms and +/-700V(DC + Peak AC @ 1/100 700 Vrms and +/-700V(DC + Peak AC)@ 1/10 & 1/100 1000 Vrms and +/-1400V(DC + Peak AC@ 1/10 & 1/100
• Output Voltage -Swing -Offset (typical) -Noise (typical) -Source Impedance (typical) +/- 7V( into 50 kohm load) <+/-5mV 0.7mVrms 50 ohm (for using 1 Mohm input system oscilloscope)
• CMMR (typical) -80dB @ 50 Hz, -60dB @ 20kHz
• Ambient Operating Temperature -10 to 40 degrees centigrade
• Ambient Storage Temperature -30 to 70 degrees centigrade
• Ambient Operating Humidity Up to 85% RH
• Ambient Storage Humidity Up to 85% RH
• Power Requirements* -Standard- 4 x AA Cells, 9VDC/40mA Mains Adapter (Both Included) -Options- USB Power cord Power leads
• Length of BNC Cable 37″
• Length of Input Leads 17″
• Dimention 7 1/4″ x 2 3/4″ x 1″
• Weight .583 lb
• Plugs 4mm Banana plugs

Each Unit Includes

• Red & Black Sprung Hooks
• Calibration Certificate
• 4ea AA Batteries
• 9VDC Adapter